Boonton 4500B cannot be started after maintenance

Time：2022-12-13                23772

　　The Boonton 4500B could not be started for maintenance. Aetna's maintenance and detection were actually Pico oscilloscope maintenance and instrument control board components were damaged. This issue will share the Boonton 4500B maintenance case.

　　Recently, our company received a Boonton 4500B maintenance instrument from a school in Northeast China. When we opened the package of Boonton 4500B, we found that the appearance of Boonton was good. After careful inspection by the engineers in AGITEK SERVICE Instrument Rental/Maintenance Center, we will give you a detailed introduction to the maintenance, product overview and product features of Boonton 4500B!

　　1、 Maintenance of Boonton 4500B:

　　Boonton maintenance model: 4500B;

　　Fault reported: unable to start the machine;

　　Fault detection: the instrument control board components are damaged;

　　Maintenance measures: replace control board components and test instruments;

　　After the comprehensive inspection of AGITEK SERVICE Maintenance Engineer Chem, it was confirmed that there was no problem after the maintenance of Boonton 4500B. During the maintenance process, the machine could not be operated directly due to the damage of the power supply of the instrument, and software program control was required. The detected fault is consistent with the fault reported for repair. After contacting the customer to confirm the fault and adjusting the whole machine, the machine will be started up for normal quality inspection and the test indicators will be normal. After the secondary quality inspection is qualified, the instrument will be cleaned and labeled fragile. After the calibration is correct, a maintenance report will be generated and returned to the customer. When the above problems occur with our instruments, we must find a professional and reliable Boonton Burton service center like Wuhan AGITEK SERVICE Instruments for after-sales maintenance!

　　2、 Boonton 4500B Product Overview:

　　Boonton 4500B RF power analyzer can capture, display and analyze RF signals in time domain and statistical domain. When using the Boonton peak power probe, 4500B can measure more parameters related to power. 4500B can complete single channel or dual channel simultaneous measurement tasks, and has the following three measurement modes:

　　Pulse measurement mode

　　Modulation measurement mode

　　Statistical measurement mode

　　4500B is widely used in such areas as radar RF pulse, TDMA and GSM, pseudo-random signal, CDMA and WLAN noise, and GSM, EDGE, TD-SCDMA timeslot signal.

　　The 4500B has a time base resolution of 100ps, video bandwidth of 80MHz (depending on the probe), flexible trigger function and a dynamic range greater than 80dB (depending on the probe). It can complete most of the required peak power measurement applications without any range switching. At the same time, 4500B can also rapidly and deeply analyze the continuous statistical power signal at the acquisition rate of 25MSA/s (option - 10) It can also provide waveform envelope display, continuous display and text display of up to 15 automatic measurement parameters per channel. Convenient I/O includes USB interface, which can save instrument settings, measurement waveforms and bitmap image files.

　　3、 Features of Boonton 4500B:

　　·8.4 inch TFT color LCD display;

　　·At the same time, 4 measurement channels, 2 memory channels and 1 arithmetic operation channel can be displayed;

　　·It has automatic peak to peak trigger, delay trigger and event trigger functions;

　　·With linear or logarithmic CCDF and PDF statistical analysis function (option - 10);

　　·Each channel can display up to 15 time-domain power analysis measurement parameters;

　　·Waveform envelope, waveform holding and rolling display modes;

　　·GPIB, USB and LAN interfaces;

　　·High video bandwidth, fast rising edge and wide dynamic range peak power probes are available;

　　·Video bandwidth can reach 80MHz;

　　Wuhan AGITEK SERVICE Testing Equipment Maintenance Co., Ltd. was established in 2008. The maintenance of domestic instruments is trapped in the monopoly of foreign large factories, which is difficult to overcome in terms of technology. With the tireless research of the engineer team, we have broken the original technical barriers of the big factory. We can also complete the chip level maintenance of the Stanford pulse generator, which can help customers effectively reduce the cost of instrument maintenance! For more Boonton Burton maintenance problems, keep an eye on Wuhan AGITEK SERVICE Instrument Rental and Maintenance Center!

　　At present, Aetna Test Equipment Maintenance Co., Ltd. has equipped various types of hardware testing equipment and professional integrated device instrument maintenance platforms, and is especially good at various testing instrument maintenance, not limited to Tektronix instrument maintenance, Shide (Agilent) instrument maintenance, Fluke instrument maintenance, Jishili instrument maintenance, R&S instrument maintenance, Liko instrument maintenance, Stanford instrument maintenance, Puyuan and other domestic and foreign well-known brand electrical testing instruments. It can not only help customers greatly reduce the cost of instrument maintenance, but also provide users with various value-added services, including factory repair. Including instrument leasing and second-hand instrument sales. If you have any problems with your instrument or need to lease or purchase the instrument, you can contact Aetna Maintenance to help you solve them wholeheartedly!

　　Contact information of Wuhan AGITEK SERVICE Instrument Rental and Maintenance Center:

　　Tel.: 17037027802

　　Company website: http://www.agitekservice-wh.com/